VE.Bus BMS V2
VE.Bus BMS V2

$175.00

Available on backorder

🔍
VE.Bus BMS V2
VE.Bus BMS V2
VE.Bus BMS V2
VE.Bus BMS V2
VE.Bus BMS V2
VE.Bus BMS V2
VE.Bus BMS V2
VE.Bus BMS V2
VE.Bus BMS V2
  1. VE.Bus BMS V2
  2. VE.Bus BMS V2
  3. VE.Bus BMS V2
  4. VE.Bus BMS V2
  5. VE.Bus BMS V2
  6. VE.Bus BMS V2
  7. VE.Bus BMS V2
  8. VE.Bus BMS V2
  9. VE.Bus BMS V2

VE.Bus BMS V2

Victron

$175.00

AvailableShips next business day
Congratulations! You got free shipping 🎉
Extra Features
  • Premium Quality
  • Secure Payments
  • Satisfaction Guarantee
  • Worldwide Shipping
  • Money Back Guarantee
Guaranteed Safe Checkout

The VE.Bus BMS V2 is a Battery Management System (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery Smart 12,8V & 25,6V (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.

Based on the status of the battery or batteries, the BMS will:

  • Generate a pre-alarm signal to alert of an imminent cell under voltage condition.
  • Disable inverting in VE.Bus inverters or inverter/chargers via VE.Bus, and disable other loads via the ‘Load Disconnect’ terminal in the event of a cell under voltage condition.
  • Disable charging in VE.Bus inverters or inverter/chargers via VE.Bus and disable other chargers via the ‘Charge Disconnect’ terminal in the event of a cell overvoltage, under temperature or over temperature condition.
  • Remote on/off terminals.
  • Ability to disable VE.Direct and VE.Can solar chargers via a GX device.
  • Allowing control of the VE.Bus inverter/charger from multiple devices, like the Digital Multi Control, the VE.Bus Smart dongle and/or a GX device.
  • Auxiliary power input and output terminals that allow a GX device to remain powered in the event of a system shutdown.
Weight 0.4 lbs
Dimensions 7.9 × 2.2 × 4.9 in
Dimensions (L x W x H mm)

200 x 55 x 125 mm
DC Input Operating Voltage Range

[9, 70] V
Current Draw Regular

10 mA
Current Draw Low

2 mA
Current Draw Off

1.5 mA
Aux Input Current Rating

1 A
Gx Power Current Rating

1 A
Load Disconnect Output Source

1 mA
Charge Disconnect Output Source

1 mA
Pre Alarm Output

Normally free floating – In case of alarm: output voltage Vbat -0.1 V
Pre Alarm Current Rating

1 A
Remote Terminals

Usage modes to turn the system on or off: a) ON when the L and H terminal are interconnected (switch or relay contact) b) ON when the L terminal is pulled to battery minus (V<3.5 V) c) ON when the H terminal is high (2.9 V < VH < Vbat) d) OFF in all other conditions
Max Humidity

95 %
Battery Communication Terminals

Terminals with M8 circular connectors
Input Output Terminals

Screw terminals
Vebus Terminals

2 x RJ45 sockets to connect to all VE.Bus products
Power Supply Cable

Recommended fuse size 0.3 A – 2.5 (dependent on devices connected to Load disconnect and pre-alarm output)
Material

ABS
Colour

Matt black with a blue sticker
Protection Category

IP20
Weight

0.12 kg
Height

23.8 mm
Width

94.5 mm
Depth

10.5 mm
Safety

EN 60950
Emission

EN 55014-1,EN-IEC 61000-6-3
Immunity

EN 55014-2,EN-IEC 61000-6-1, EN-IEC 61000-6-2
Automotive

EN 50498

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products